8737 MOD
8737 MOD Spec SheetIS 8737 are the reference materials for hot working. The mean Lead content provides good machinability of the forged part. Because of its Composition this alloy is suited for the production of LPG Valve.
Chemical Composition
| Elements | Min (%) | Max (%) |
|---|---|---|
| Cu | 56.50 | 60 |
| Pb | 1.00 | 2.00 |
| Fe | – | 0.30 |
| Mn | 0.50 | – |
| Total Others | – | 0.75 |
| Zn | Remainder | |
Mechanical properties according to IS 8737 MOD (as per temper HB)
| Range (mm) | UTS Min (MPa) |
UTS Max (MPa) |
PS Min (MPa) |
Elongation Min (%) |
Hardness Min (HRB) |
Hardness Max (HRB) |
||
|---|---|---|---|---|---|---|---|---|
| Round (Dia) | 1.5 | 75 | 392 | – | – | 18 | – | – |
| Hex (A/F) | 3 | 70 | 392 | – | – | 18 | – | – |
| Square (A/F) | 3 | 60 | 392 | – | – | 18 | – | – |
| PHYSICAL PROPERTIES | |
|---|---|
| Density (English) | 0.303 lb/in3 |
| CTE, linear (English) | 14.4 ᶙin/in-˚F |
| Specific Heat Capacity (English) | 0.0908 BTU/lb-˚F |
| Thermal Conductivity (English) | 784 BTU-in/hr-ft²-˚F |
| Melting Point (English) | 1620 – 1650 ˚F |
| Solidus (English) | 1620 ˚F |
| Liquidus (English) | 1650 ˚F |
| FABRICATION PROPERTIES | |
|---|---|
| Technique | Suitability |
| Machinability (CuZn39Pb3 = 100 %) | 80% |
| Capacity for Being Cold Worked | Poor |
| Capacity for Being Hot Worked | Excellent |
Typical Uses
